|
MINI-KIT REFILL SYRINGES
The Multi-Bond Composite Resin Cement System is a specially formulated light cure, dual cure, and chemical cure low viscosity luting resin for use with veneers, crowns, inlays, onlays, bridges, metal posts, PFM crowns and metal crowns.
Although the Universal Kit (Mini or Standard) is primarily for crowns, inlays, onlays or laminate veneers not requiring shade adjustment, all kits can be used for any of the above mentioned restorations. If using a total etch system, also use the dentin/enamel primer adhesive. Whether porcelain primer is needed is dependent upon the type of restoration and whether the lab silanates the restoration. (See Restoration Selection and Cementation Guide)
The composite is compatible with all light and dual cure products.
The unfilled resin (Bonding Agent) has been formulated for enamel surfaces, however it may be used on combination dentin/enamel surfaces when laminate veneering or as a adhesive on a silanated restoration. A small quantity of enamel bonding agent may be added to the base composite to adjust its viscosity. (Do not adjust catalyst)
Addition of Porcelain Primer (silane) provides a chemical bond between a porcelain /ceramic surface and the composite cement.
NOTE: Zirconia core or aluminous core restorations should NOT be treated with porcelain primer, unless the core surface has been treated with RF plasma spraying (hexamethyldisiloxane) or Rocatec (3-M) treatment, by tribochemical reaction, which coats the surface of the zirconia with small particles of silicium oxide. These will bind to the silanization agent and establish a chemical bond to the restoration and the adhesive resin cement.
Addition of dual cure catalyst will convert the composite to a dual or self cure system. Addition of the Confi-Quick One Part Dentin-Enamel Primer /Adhesive gives confidence when bonding to both dentin and enamel surfaces when bonding crowns, inlays, onlays and bridges.
The composite is a hybrid variety resin with an optimal amount of submicron filler between the macro filler. Masking characteristics are enhanced and it provides life-like vitality under varying lighting conditions.
Because of it's thixotropic nature, the composite has favorable handling characteristics. A fluoride release composite that is also radiopaque.
|
Opaque White Composite 1.0 g. syringe with catalyst 1.0 gram syringe (2 gram total)
Specially formulated low viscosity luting resin for use with Maryland Bridges, Metal Posts, PFM Crowns, Metal Crowns. Sold with a low viscosity catalyst. It is highly opaque to prevent "show through" and greying of abutments. Compatible with other light and dual cure products. Minimum of 1 package when ordering online.
Product # 04 Click product number for pricing
|
1 pkg. Min.
|
Disc 25 microns thick (covering lettering)
|
Extra Light Composite 1.0 gram syringe
A composite lighter than B, used when the patient wants to match bleached teeth or wants whiter than normal teeth (Hollywood white). Compatible with other light and dual cure products. Minimum of 1 package when ordering online. Product # 05 Click product number for pricing
|
1 pkg. = 2 syringes
|
Extra-Light Composite Disc 25 microns thick
|
Light Universal Composite 1.0 gram syringe
Can be used for B1, A1, A2 (2M1, 2M2 2R1.5) shades or when blending with dentition for most lighter shades. Compatible with other light and dual cure products. Minimum of 1 package when ordering online. Product # 06 Click product number for pricing
|
1 pkg. = 2 syringes
|
Light Universal Composite Disc 25 microns thick
|
Dark Yellow Composite 1.0 gram syringe
Used primarily as a modifying shade for Vita A range and B range and may be used for A4 shade. Compatible with other light and dual cure products. Minimum of 1 package when ordering online. Product # 07 Click product number for pricing
|
1 pkg. = 2 syringes
|
Dark Yellow Composite Disc 25 microns thick
|
Light Yellow Grey Composite 1.0 gram syringe
Used as a base shade in Vita B and D range shades (2L1.53M1, 3R1.5). Matches B2. Compatible with other light and dual cure products. Minimum of 1 package when ordering online.
Product # 08 Click product number for pricing
|
1 pkg. = 2 syringes
|
Light Yellow Grey Composite 25 microns thick
|
Light Grey Composite 1.0 gram syringe
Used primarily as a base shade for Vita C range shades. Matches Vita C1(3M1, 3L1.5). Compatible with other light and dual cure products. Minimum of 1 package when ordering online.
Product # 09 Click product number for pricing
|
1 pkg. = 2 syringes
|
Light Grey Composite Disc 25 microns thick
|
Dark Grey Composite 1.0 gram syringe
Used as a modifying shade for Vita C and D range shades.Matches Vita C4. Compatible with other light and dual cure products. Minimum of 1 package when ordering online.
Product# 10 Click product number for pricing
|
1 pkg. = 2 syringes
|
Dark Grey Composite Disc 25 microns thick
|
Dual Cure Catalyst 1.0 gram syringe
A low viscosity resin used to convert PSI composite to a dual cure composite system. Compatible with other light and dual cure products. Minimum of 1 package when ordering online.
Product # 19 Click product number for pricing
|
1 pkg. = 2 syringes
|
|
Bonding Agent 1.0 gram syringe
An unfilled hydrophobic adhesive resin designed for bonding to enamel and for ceramic repairs. Becomes dual cure when used with catalyst. Compatible with other light and dual cure products. May be used to adjust composite base viscosity. Minimum of 1 package when ordering online.
Product # 15 Click product number for pricing
|
1 pkg. = 2 syringes
|
|
Tooth Etchant 1.0 gram syringe
A 37% O-Phosphoric acid etching gel for etching and cleaning. Colored green for easy visability.
Minimum of 1package when ordering online.
Product # 16 Click product number for pricing
|
1 pkg. = 2 syringes
|
|
Porcelain Primer (Silane) .5 ml syringe
A silane coupling agent that increases the wettability of etched surfaces and provides for a chemical bond between the porcelain surface and the resin, thus increasing the porcelain/resin interface bond strength. Compatible with other light and dual cure products. Minimum of 1package when ordering online.
Product # 22 Click product number for pricing
|
1 pkg. = 2 syringes
|
|
Dentin/Enamel Primer/Adhesive .2 gram syringe (Confi-Quick One Part)
One step, one part, light activated Dentin/Enamel Primer/Adhesive.
Etch, rinse, apply and light cure then apply again and light cure and you are through. A 5th generation Primer/Adhesive unbeatably easy to use. Can be used for all indirect and direct restorations, lining under amalgams, preventing or stopping dentin sensitivity. Compatible with other light and dual cure products.
Minimum of 1package when ordering online.
Product # 21 Click product number for pricing
|
1 pkg. = 2 syringes
|
|
|
 |
 |
|