VITRAVEST REFRACTORY DIE MODEL POWDER

Material Safety Data Sheet
Identity: VITRAVEST Fine Grain "Tru Die" (Powder)

SECTION I
Manufacturer: Gresco Products, Inc.
Address: 13391 Murphy Road - Stafford, TX 77477
Emergency Telephone Number: None
Telephone Number for Information: 1-765-643-1061
Date Prepared: Jan. 14, 2006

SECTION II & III - Hazardous Ingredients & Physical/Chemical Characteristics
Hazardous Components (As Defined by CFR 1910.1200): Crystalline Silica (Quartz) Cas 01-4808-60-7
Exposure Limits: OSHA PEL = .1mg/m3 TLV-TWA = .1mg/m3
Boiling Point: 4046oF
Vapor Pressure (mm Hg.): 0 at 20oC
Vapor Density (Air = 1): 1
Specific Gravity (water = 1): 2.65
Melting Point: 3050oF
Evaporation Rate (Butyl Acetate = 1): 0
Solubility in Water: Insoluble
Appearance and Odor White powder (Z-20 is light yellow), no odor

SECTION IV - Fire and Explosion Data
Flash Point (Method Used): Will not burn
Flammable Limits: None
Extinguishing Media: Non
Special Fire Fighting Procedures: None required
Unusual Fire and Explosion Hazards: None known

SECTION V - Reactivity Data
Stability: Stable
Incompatibility (Materials to Avoid): Contact with powerful oxidizers such as fluorine, chlorine
trifluoride, manganese trioxide, oxygen difluoride may cause fires.
Hazardous Decomposition or By Products: The by product of silica and hydrofluoric acid is silicon tetra
fluoride, a highly corrosive gas.
Hazardous Polymerization: Will not occur

SECTION VI - Health Hazard Data
Routes of Entry:
inhalation?: Yes
skin?: No
ingestion?: No
eyes?: No
Health Hazards (Acute and Chronic): Prolonged exposure to respirable crystalline silica may cause
delayed chronic lung injury (Silicosis).
Carcinogenicity:
NTP?: Yes - Respirable silica may be anticipated to be a carcinogen
IARC Monographs?: Yes - Class 2A - Sufficient evidence for carcinogenicity in
experimental animals; limited evidence for carcinogenicty in humans
Signs and Symptoms of Exposure: Undue breathlessness, wheezing, cough, sputum production.
Medical Conditions Aggravated by Exposure: Pulmonary function may be reduced by inhalation of respirable
crystalline silica. Also lung scarring produced by such inhalation may lead to a progressive massive fibrosis of the
lung which may aggravate other pulmonary conditions and diseases and which increases susceptibility to pulmonary
tuberculosis. Progressive massive fibrosis may be accompanied by right heart enlargement, heart enlargement,
heart failure, and pulmonary failure. Smoking aggravates the effects of exposure.
Emergency and First Aid Procedures: Eyes: Wash with large amount of water, consult a physician.
Inhalation: Remove person(s) to fresh air, give artificial respiration as needed, seek medical attention.

SECTION VII - Precautions for Safe Handling and Use
Steps to Be Taken in Case Material is Released or Spilled: Clean spilled material in a dustless manner.
Waste Disposal Method: Dispose in accordance with local, state, and federal regulations.
Precautions to Be Taken in Handling and Storing: Avoid spilling material and creating dust.
Other Precautions: Use adequate ventilation and dust collection.

SECTION VIII - Control Measures
Respiratory Protection: Recommended
Ventilation: Use sufficient exhaust to reduce the level of respirable
crystalline silica to the PEL.
Protective Gloves: Optional
Eye Protection: Recommended
Other Protective Clothing or Equipment: Optional
Work/Hygienic Practices: Avoid creating and breathing dust.